Fort Lauderdale Window Replacement provides professional french doors in Fort Lauderdale, FL for residential and commercial properties across Broward County. A pair of hinged glass doors reads better than a slider in almost any room, and in Broward the swing direction is not a style question. It is a structural one, and it changes the price, the hardware and sometimes whether the approval covers what you want at all.
Outswing is the South Florida default for a reason. When wind pushes on the outside of an outswing door it forces the panels harder against their stops, so the frame carries the load rather than the latch hardware. Inswing does the opposite under positive pressure, which is why inswing units in this zone tend to come with lower ratings, tighter size limits, or a shorter list of approved configurations.
The practical objection to outswing is what happens on the patio. Panels sweep out over a deck, and a screen enclosure, a planter, a barbecue or a settled furniture layout can make that impossible. We measure the swing arc on site before recommending a configuration. A pair of panels that will only open two thirds of the way is a daily irritation in the wrong style, and nobody notices until the doors are already hanging.
Water performance follows the same logic. An outswing door with a proper sill and a back-dammed threshold handles wind-driven rain better than an inswing unit with a low profile sill. If you want inswing on an exposed elevation, we will tell you what the water rating actually is on the listed unit and let you decide with the number in front of you.
The astragal is the part nobody asks about and everybody should. On a double door the inactive panel is held by the astragal, and in an approved assembly that means flush bolts engaging deep into the head and the sill, with the strike depths called out on the drawings. A shallow strike into a thin threshold is the difference between a door that holds and a door that blows open.
Multipoint locking on the active panel matters for the same reason. Three or five engagement points spread the load along the height of the frame instead of concentrating it at one latch. The gear is part of the tested assembly, so the hardware finish you choose is a style decision but the hardware type is not.
Sidelites and transoms widen the picture and complicate the approval. A door with flanking fixed lites is a mulled assembly, and the mullion between the door frame and the sidelite has to be covered by the listing. Factory-mulled units solve this cleanly. Site-mulled combinations often do not survive plan review.
Where we steer people away from French doors is a high-traffic opening on a windward elevation with heavy daily use. Two panels, two seals and an astragal is more maintenance than one sliding panel, and in that specific spot a slider is the better tool. Everywhere else, on a study, a bedroom or a courtyard, they are worth the extra care.
Our licensed and insured team brings the right materials and equipment to every job — Miami-Dade County Notice of Acceptance documents, Florida Product Approval listings valid inside the HVHZ, TAS 201 large-missile impact testing, TAS 202 uniform static air pressure testing, TAS 203 cyclic wind pressure loading, laminated glazing with ionoplast and butyral interlayers — and backs the work with a written workmanship warranty. We serve Fort Lauderdale and nearby communities including Hollywood, Pembroke Pines, Coral Springs, Miramar.
What We Handle
Everything our french doors in Fort Lauderdale covers
One crew, one point of contact, and the full range of french doors work in Fort Lauderdale, FL. If it is on this list we do it in house rather than handing it to a subcontractor:
- french doors
- impact french doors
- hinged patio doors
- outswing french doors
- inswing french doors
- double french doors
- french door hardware
- multipoint lock doors
- french door sidelites
- astragal doors
- french door threshold
- french door replacement
- hurricane rated french doors
- french door glass
- french door sizes
Not sure which one describes your situation? Describe it in plain words and we will sort it out — or browse the rest of our Fort Lauderdale services.
Materials, equipment and how we do french doors
The difference between french doors that lasts and french doors that gets redone in three years is almost always preparation and materials, not the finish you see on day one. We work with Miami-Dade County Notice of Acceptance documents, Florida Product Approval listings valid inside the HVHZ, TAS 201 large-missile impact testing, TAS 202 uniform static air pressure testing, spec them to the job instead of to the invoice, and write the material grades into the free estimate so you know exactly what you are buying.
Every Fort Lauderdale job runs the same way: site walk and measurements, written scope and fixed price, protection of the surrounding area, then the work itself with a daily clean-up. Years of window work in Broward County means we have already met whatever your property is going to throw at us — awkward access, older construction, an HOA with opinions.
Where we do french doors outside Fort Lauderdale
Fort Lauderdale Window Replacement covers Fort Lauderdale and the surrounding communities of Broward County. Crews run out to the same nearby cities every week, so an out-of-town job does not mean an out-of-town price.
- French Doors in Hollywood, FL — Broward County, population 153,067 at the 2020 census
- French Doors in Pembroke Pines, FL — Broward County, population 171,178 at the 2020 census
- French Doors in Coral Springs, FL — Broward County, population 134,394 at the 2020 census
- French Doors in Miramar, FL — Broward County, population 134,721 at the 2020 census
- French Doors in Pompano Beach, FL — Broward County, population 112,046 at the 2020 census
- French Doors in Davie, FL — Broward County, population 105,691 at the 2020 census
Start on the Fort Lauderdale Window Replacement homepage for a free estimate, or call (844) 511-2320 and describe the job.
Why Fort Lauderdale Chooses Fort Lauderdale Window Replacement
- ✓We quote from the current product approval, not a catalog, so the model, tested size range and approval number are on the estimate you sign.
- ✓The anchor schedule gets read before the price is set, because concrete, hollow block and a wood buck are three different installations at three different costs.
- ✓We open the perimeter of a sample opening during the survey, so failed buck material and masonry repair are priced up front instead of appearing as a change order.
- ✓We will tell you when approved shutters over sound existing glass are the cheaper legal answer, and quote that alongside the impact package.
The standards behind french doors
Quality here is not a matter of opinion — it is written down. The french doors work we do in Fort Lauderdale follows published industry standards: NFRC sets the U-factor and SHGC ratings on every window label, and ENERGY STAR defines the efficiency thresholds by climate zone. If a contractor cannot tell you which standard a detail comes from, that is worth asking about before you sign.
Every french doors project in Fort Lauderdale gets the same attention, whether it is a single room or a full commercial job. We show up on schedule, keep the site clean, and stand behind the work — the estimate is free and there is no pressure.
Ready to get started? Call (844) 511-2320 for a free french doors free estimate in Fort Lauderdale, or request a quote and we'll get right back to you.