Fort Lauderdale Window Replacement provides professional retrofit windows in Fort Lauderdale, FL for residential and commercial properties across Broward County. This is the page where we talk ourselves out of the cheaper job more often than anywhere else we work. Fort Lauderdale is in Broward, and Broward and Miami-Dade are the only two counties inside Florida's High Velocity Hurricane Zone. That changes what a retrofit has to prove.
The method is the same everywhere. A retrofit, which the trade also calls an insert or a pocket job, sets a new window inside the frame already bedded in your wall, leaving stucco, trim and interior casing untouched. A full-frame replacement strips back to the structural opening. Faster and cheaper against slower and complete, and in most states that is the entire trade-off.
In the High Velocity Hurricane Zone the approval document does the deciding. A window permitted here needs a Miami-Dade Notice of Acceptance, or a Florida Product Approval carrying the zone endorsement, traced to the TAS test protocols.
People read that as a glass specification. It is not. It is an approval for an assembly, and the installation drawings are part of it.
Open any NOA to those drawings and you will find the anchorage: fastener type, diameter, spacing, embedment depth, edge distance, and the substrate each one is tested into. Concrete, hollow or filled block, a pressure-treated buck. The rated pressure is the pressure that anchorage held under cyclic loading. Change the anchorage and the number on the sticker stops describing your opening.
A retrofit, by definition, anchors to the old frame rather than to the structure. Some approvals do publish an insert or frame-in-frame detail, and where one covers your exact condition, a retrofit is permitted and legitimate. Where none does, there is no path through plans review, because the reviewer has no tested condition to measure the installation against.
The local housing stock makes this concrete. The 1950s and 1960s ranches through Coral Ridge, Lauderdale Manors and the Riverland area still carry original aluminum awning and jalousie frames. Those frames were never designed to receive a modern impact assembly's anchor loads, and a new window hung off them is a rated unit in an unrated installation.
Measure the bedrooms too. A retrofit nests inside the old frame and loses clear opening on all four sides, and an escape and rescue opening is sized on clear opening. Section 702.5 of the Florida Existing Building Code gives replacement windows conditional relief there, including installing the largest standard size the existing frame or rough opening accepts, but you want that checked rather than assumed.
So the plain version. On a Broward house where the code wants a rated assembly on that opening and no approval covers anchoring into your old frame, a retrofit is the wrong purchase even though it costs less, and anyone selling you one has skipped the installation drawings. Where an insert detail does cover it, buy it and keep your stucco. Permits go through Fort Lauderdale building services, under the county board of rules and appeals.
Our insured team brings the right materials and equipment to every job — Miami-Dade County Notice of Acceptance documents, Florida Product Approval listings valid inside the HVHZ, TAS 201 large-missile impact testing, TAS 202 uniform static air pressure testing, TAS 203 cyclic wind pressure loading, laminated glazing with ionoplast and butyral interlayers — and backs the work with a written workmanship warranty. We serve Fort Lauderdale and nearby communities including Hollywood, Pembroke Pines, Coral Springs, Miramar.
What the Job Covers
Everything our retrofit windows in Fort Lauderdale covers
One crew, one point of contact, and the full range of retrofit windows work in Fort Lauderdale, FL. If it is on this list we do it in house rather than handing it to a subcontractor:
- retrofit windows fort lauderdale
- retrofit vs full frame windows fort lauderdale
- hvhz retrofit window installation broward county
- pocket replacement windows broward county
- full frame window replacement broward county
Not sure which one describes your situation? Describe it in plain words and we will sort it out — or browse the rest of our Fort Lauderdale services.
Materials, equipment and how we do retrofit windows
The difference between retrofit windows that lasts and retrofit windows that gets redone in three years is almost always preparation and materials, not the finish you see on day one. We work with Miami-Dade County Notice of Acceptance documents, Florida Product Approval listings valid inside the HVHZ, TAS 201 large-missile impact testing, TAS 202 uniform static air pressure testing, spec them to the job instead of to the invoice, and write the material grades into the free estimate so you know exactly what you are buying.
Every Fort Lauderdale job runs the same way: site walk and measurements, written scope and fixed price, protection of the surrounding area, then the work itself with a daily clean-up. Years of window work in Broward County means we have already met whatever your property is going to throw at us — awkward access, older construction, an HOA with opinions.
Where we do retrofit windows outside Fort Lauderdale
Fort Lauderdale Window Replacement covers Fort Lauderdale and the surrounding communities of Broward County. Crews run out to the same nearby cities every week, so an out-of-town job does not mean an out-of-town price.
- Retrofit Windows in Hollywood, FL — Broward County, population 153,067 at the 2020 census
- Retrofit Windows in Pembroke Pines, FL — Broward County, population 171,178 at the 2020 census
- Retrofit Windows in Coral Springs, FL — Broward County, population 134,394 at the 2020 census
- Retrofit Windows in Miramar, FL — Broward County, population 134,721 at the 2020 census
- Retrofit Windows in Pompano Beach, FL — Broward County, population 112,046 at the 2020 census
- Retrofit Windows in Davie, FL — Broward County, population 105,691 at the 2020 census
Start on the Fort Lauderdale Window Replacement homepage for a free estimate, or call (833) 293-3657 and describe the job.
Why Fort Lauderdale Chooses Fort Lauderdale Window Replacement
- ✓We quote from the current product approval, not a catalog, so the model, tested size range and approval number are on the estimate you sign.
- ✓The anchor schedule gets read before the price is set, because concrete, hollow block and a wood buck are three different installations at three different costs.
- ✓We open the perimeter of a sample opening during the survey, so failed buck material and masonry repair are priced up front instead of appearing as a change order.
- ✓We will tell you when approved shutters over sound existing glass are the cheaper legal answer.
Want a written retrofit windows estimate in Fort Lauderdale?
Call (833) 293-3657 or send the short form — no pressure, same-day reply on most requests.
The standards behind retrofit windows
Quality here is not a matter of opinion — it is written down. The retrofit windows work we do in Fort Lauderdale follows published industry standards: NFRC sets the U-factor and SHGC ratings on every window label, and ENERGY STAR defines the efficiency thresholds by climate zone. If a contractor cannot tell you which standard a detail comes from, that is worth asking about before you sign.
Every retrofit windows project in Fort Lauderdale gets the same attention, whether it is a single room or a full commercial job. We show up on schedule, keep the site clean, and stand behind the work — the estimate is free and there is no pressure.
Ready to get started? Call (833) 293-3657 for a free retrofit windows free estimate in Fort Lauderdale, or request a quote on our contact page and we'll get right back to you.