Fort Lauderdale Window Replacement provides professional aluminum windows in Fort Lauderdale, FL for residential and commercial properties across Broward County. In most of the country aluminum is the frame you talk a homeowner out of. In Broward it is the frame we specify most often, for one reason: it holds the highest design pressures at the widest openings, with a deeper approved catalog than anything else here.
That matters because South Florida housing stock is built around wide glass. Rear elevations facing a pool or a canal were designed with long horizontal rollers and big fixed lites, and those openings are exactly where vinyl and clad wood run out of tested size. An aluminum extrusion carries the load in a slimmer profile, so you keep the glass area the architect drew instead of chopping it into approved fragments.
The old complaint about aluminum is conduction, and it is a fair complaint stated badly. A thermally improved frame with a poured-and-debridged or polyamide break cuts the conduction path substantially, and in a climate with no real heating season the remaining penalty is small. Spend your energy budget on the glass coating, where it actually shows up on a bill, and buy the frame for its structural capacity.
Finish is where a Broward aluminum job succeeds or fails over time. We prefer a fluoropolymer powder or an anodized finish on anything within a mile or so of the water, because that is the coating class that holds color and resists chalking in salt air. A cheap polyester finish on an east-side house looks fine for four years and then does not.
Hardware has to be selected with the same discipline. Rollers, cam locks, keepers and fasteners in a coastal opening should be stainless rather than plated steel or zinc die-cast, and the approval will often specify the hardware as part of the tested assembly. Swapping in a different lock because it was in the van is not a preference issue here, it is a listing issue.
Corrosion at the anchor is the failure mode nobody photographs. Aluminum against a wet buck or an untreated fastener sets up galvanic corrosion that works quietly behind the stucco return for years. We isolate the frame from dissimilar metals, use the fastener type the approval names, and replace failed buck material rather than shooting new anchors into soft wood.
The sightline conversation is worth having before you order. Impact-rated aluminum frames are heavier than the non-impact units many Broward houses still have, so a like-for-like replacement usually takes a little glass area away at the perimeter. Seeing that number in advance prevents an unpleasant surprise on install day, especially on a wall of small windows where the loss compounds.
Where aluminum is not the answer, we say so. A house of modest bedroom-sized openings with no wide spans, no water exposure and a tight budget is a vinyl house, and pushing it into aluminum is spending money on capacity nobody in that building will ever use. The frame should be chosen against the openings and the exposure, not against a preference.
Our licensed and insured team brings the right materials and equipment to every job — Miami-Dade County Notice of Acceptance documents, Florida Product Approval listings valid inside the HVHZ, TAS 201 large-missile impact testing, TAS 202 uniform static air pressure testing, TAS 203 cyclic wind pressure loading, laminated glazing with ionoplast and butyral interlayers — and backs the work with a written workmanship warranty. We serve Fort Lauderdale and nearby communities including Hollywood, Pembroke Pines, Coral Springs, Miramar.
What We Handle
Everything our aluminum windows in Fort Lauderdale covers
One crew, one point of contact, and the full range of aluminum windows work in Fort Lauderdale, FL. If it is on this list we do it in house rather than handing it to a subcontractor:
- aluminum windows
- impact aluminum windows
- thermally broken aluminum
- aluminum window frames
- narrow sightline aluminum
- aluminum single hung
- aluminum horizontal roller
- large opening windows
- high design pressure windows
- anodized aluminum windows
- powder coated aluminum
- aluminum window cost
- coastal aluminum frames
- aluminum picture windows
- aluminum window approval
Not sure which one describes your situation? Describe it in plain words and we will sort it out — or browse the rest of our Fort Lauderdale services.
Materials, equipment and how we do aluminum windows
The difference between aluminum windows that lasts and aluminum windows that gets redone in three years is almost always preparation and materials, not the finish you see on day one. We work with Miami-Dade County Notice of Acceptance documents, Florida Product Approval listings valid inside the HVHZ, TAS 201 large-missile impact testing, TAS 202 uniform static air pressure testing, spec them to the job instead of to the invoice, and write the material grades into the free estimate so you know exactly what you are buying.
Every Fort Lauderdale job runs the same way: site walk and measurements, written scope and fixed price, protection of the surrounding area, then the work itself with a daily clean-up. Years of window work in Broward County means we have already met whatever your property is going to throw at us — awkward access, older construction, an HOA with opinions.
Where we do aluminum windows outside Fort Lauderdale
Fort Lauderdale Window Replacement covers Fort Lauderdale and the surrounding communities of Broward County. Crews run out to the same nearby cities every week, so an out-of-town job does not mean an out-of-town price.
- Aluminum Windows in Hollywood, FL — Broward County, population 153,067 at the 2020 census
- Aluminum Windows in Pembroke Pines, FL — Broward County, population 171,178 at the 2020 census
- Aluminum Windows in Coral Springs, FL — Broward County, population 134,394 at the 2020 census
- Aluminum Windows in Miramar, FL — Broward County, population 134,721 at the 2020 census
- Aluminum Windows in Pompano Beach, FL — Broward County, population 112,046 at the 2020 census
- Aluminum Windows in Davie, FL — Broward County, population 105,691 at the 2020 census
Start on the Fort Lauderdale Window Replacement homepage for a free estimate, or call (844) 511-2320 and describe the job.
Why Fort Lauderdale Chooses Fort Lauderdale Window Replacement
- ✓We quote from the current product approval, not a catalog, so the model, tested size range and approval number are on the estimate you sign.
- ✓The anchor schedule gets read before the price is set, because concrete, hollow block and a wood buck are three different installations at three different costs.
- ✓We open the perimeter of a sample opening during the survey, so failed buck material and masonry repair are priced up front instead of appearing as a change order.
- ✓We will tell you when approved shutters over sound existing glass are the cheaper legal answer, and quote that alongside the impact package.
The standards behind aluminum windows
Quality here is not a matter of opinion — it is written down. The aluminum windows work we do in Fort Lauderdale follows published industry standards: NFRC sets the U-factor and SHGC ratings on every window label, and ENERGY STAR defines the efficiency thresholds by climate zone. If a contractor cannot tell you which standard a detail comes from, that is worth asking about before you sign.
Every aluminum windows project in Fort Lauderdale gets the same attention, whether it is a single room or a full commercial job. We show up on schedule, keep the site clean, and stand behind the work — the estimate is free and there is no pressure.
Ready to get started? Call (844) 511-2320 for a free aluminum windows free estimate in Fort Lauderdale, or request a quote and we'll get right back to you.