Fort Lauderdale Window Replacement provides professional entry doors in Fort Lauderdale, FL for residential and commercial properties across Broward County. The front door is the smallest opening on this list and the one most likely to be forgotten during a window project. It is also a glazed opening in the eyes of the code, which means it needs the same approval path as the windows around it.
That catches people. A homeowner replaces every window with an approved impact unit, leaves the original wood front door with its decorative glass, and has an unprotected opening in the middle of the elevation. If the point of the project was the building envelope, the entry is part of the envelope.
Material choice in this climate is easier than in most markets. Fiberglass skins do not rust, do not swell, and take a paint or stain finish that survives sun and salt. Steel is stiff and secure, and behaves well under a deep overhang and badly at the bottom edge without one. Solid wood is beautiful and, on an unshaded elevation here, a maintenance commitment most people underestimate.
Glass in the door is where the approval work happens. Decorative glazing has to be part of the tested assembly, which is why approved doors come with a defined list of glass inserts rather than an open catalog. A leaded or beveled panel you found separately usually cannot be dropped into an approved slab without voiding the listing.
Sidelites and transoms follow the same rule as French doors. The mullion joining a door frame to a sidelite carries load, and it has to appear in the approval. Factory-mulled units are the reliable route. A site-assembled entry with two sidelites and an arched transom is a nice drawing and a difficult permit.
The frame and threshold matter more than the slab. Most failures we see at an entry are a rotted jamb bottom, a threshold that has lost its seal to the slab, or an anchor that never got the embedment the drawings asked for. Replacing a door and reusing a tired frame saves a few hundred dollars and gives back most of what the new door was supposed to fix.
Hardware is a genuine security decision here, not a finish selection. A multipoint lock on an approved slab, strikes that reach through the jamb into a solid substrate, and hinges with long screws that catch framing rather than casing are the parts that actually resist a shoulder or a storm. A heavy handleset bolted to a shallow strike is jewelry with a price tag.
One recommendation that saves money. If the frame is solid and the only real problem is the glazed insert, ask whether an approved slab swap into the existing approved frame is possible. Sometimes it is, and the job costs a fraction of a full entry system. Sometimes the frame carries no approval at all and the whole unit has to go. We will tell you which one you have before you get attached to the cheaper answer.
Our licensed and insured team brings the right materials and equipment to every job — Miami-Dade County Notice of Acceptance documents, Florida Product Approval listings valid inside the HVHZ, TAS 201 large-missile impact testing, TAS 202 uniform static air pressure testing, TAS 203 cyclic wind pressure loading, laminated glazing with ionoplast and butyral interlayers — and backs the work with a written workmanship warranty. We serve Fort Lauderdale and nearby communities including Hollywood, Pembroke Pines, Coral Springs, Miramar.
What We Handle
Everything our entry doors in Fort Lauderdale covers
One crew, one point of contact, and the full range of entry doors work in Fort Lauderdale, FL. If it is on this list we do it in house rather than handing it to a subcontractor:
- entry doors
- front doors
- impact entry doors
- fiberglass entry door
- steel entry door
- door sidelites
- entry door glass
- door transom
- entry door replacement
- hurricane rated entry door
- door threshold replacement
- entry door hardware
- double entry doors
- entry door frame
- entry door installation
Not sure which one describes your situation? Describe it in plain words and we will sort it out — or browse the rest of our Fort Lauderdale services.
Materials, equipment and how we do entry doors
The difference between entry doors that lasts and entry doors that gets redone in three years is almost always preparation and materials, not the finish you see on day one. We work with Miami-Dade County Notice of Acceptance documents, Florida Product Approval listings valid inside the HVHZ, TAS 201 large-missile impact testing, TAS 202 uniform static air pressure testing, spec them to the job instead of to the invoice, and write the material grades into the free estimate so you know exactly what you are buying.
Every Fort Lauderdale job runs the same way: site walk and measurements, written scope and fixed price, protection of the surrounding area, then the work itself with a daily clean-up. Years of window work in Broward County means we have already met whatever your property is going to throw at us — awkward access, older construction, an HOA with opinions.
Where we do entry doors outside Fort Lauderdale
Fort Lauderdale Window Replacement covers Fort Lauderdale and the surrounding communities of Broward County. Crews run out to the same nearby cities every week, so an out-of-town job does not mean an out-of-town price.
- Entry Doors in Hollywood, FL — Broward County, population 153,067 at the 2020 census
- Entry Doors in Pembroke Pines, FL — Broward County, population 171,178 at the 2020 census
- Entry Doors in Coral Springs, FL — Broward County, population 134,394 at the 2020 census
- Entry Doors in Miramar, FL — Broward County, population 134,721 at the 2020 census
- Entry Doors in Pompano Beach, FL — Broward County, population 112,046 at the 2020 census
- Entry Doors in Davie, FL — Broward County, population 105,691 at the 2020 census
Start on the Fort Lauderdale Window Replacement homepage for a free estimate, or call (844) 511-2320 and describe the job.
Why Fort Lauderdale Chooses Fort Lauderdale Window Replacement
- ✓We quote from the current product approval, not a catalog, so the model, tested size range and approval number are on the estimate you sign.
- ✓The anchor schedule gets read before the price is set, because concrete, hollow block and a wood buck are three different installations at three different costs.
- ✓We open the perimeter of a sample opening during the survey, so failed buck material and masonry repair are priced up front instead of appearing as a change order.
- ✓We will tell you when approved shutters over sound existing glass are the cheaper legal answer, and quote that alongside the impact package.
The standards behind entry doors
Quality here is not a matter of opinion — it is written down. The entry doors work we do in Fort Lauderdale follows published industry standards: NFRC sets the U-factor and SHGC ratings on every window label, and ENERGY STAR defines the efficiency thresholds by climate zone. If a contractor cannot tell you which standard a detail comes from, that is worth asking about before you sign.
Every entry doors project in Fort Lauderdale gets the same attention, whether it is a single room or a full commercial job. We show up on schedule, keep the site clean, and stand behind the work — the estimate is free and there is no pressure.
Ready to get started? Call (844) 511-2320 for a free entry doors free estimate in Fort Lauderdale, or request a quote and we'll get right back to you.